How To Prepare Exterior Window Sills For Painting

Tips For Painting Exterior Window Frames

| June 21, 2017
Author: Raj Kain Window Frames

Attractive windows can dramatically improve your home's curb entreatment. But fifty-fifty with the best design and windows installation, exposure to the elements will cause your windows to wear downwardly and lose their beauty over fourth dimension. Adding a fresh coat of paint can amend the ability of your windows to withstand corruption from repeated use and the elements, restore their beauty, and make them final longer.

However, painting exterior window frames is a rather fourth dimension-consuming project. Despite the pocket-size surface area that needs to be painted, it can take yous nigh 50 percentage of the fourth dimension you would need to paint your entire house, depending on the type of windows you accept and their condition.

Proper planning and preparation, choosing the right tools and paints, and using the right application techniques can requite you improve-looking and longer-lasting results. Here are some tips to help you with the process:

1. Assess the condition of your window frames
  - Inspect the condition of glazing effectually the windowpanes to determine whether they need replacing.
  - Cheque the window sill and hinges for dirt and cobwebs and clean them.
  - Use an inexpensive DIY testing kit to check for the presence of lead in the existing pigment.
  - If you suspect that in that location is atomic number 82, use a chemical stripper to remove the pigment. Don't apply heat guns or sandpaper as they can spread pb particles and fumes. Follow all safety precautions.
2. Apply quality tools and supplies for the job

The typical tools used when painting exterior window frames include:

1. - Brush/Material – Used to wipe off backlog pigment
  - Masking tape – Employ it to mask effectually the window to protect the glass from paint
  - Wood filler – Use it to make full any cracks/holes in the frame
  - Putty knife – For applying whatever filler
  - Drop sheets – To reduce cleanup workload
  - Painter'southward gloves – To save on cleaning afterward the task
  - Fine sandpaper – Sanding the surface improves pigment adhesion
  - Pure bristle paintbrush – Use a 2 or 2.five-inch-wide nylon or polyester brush to use the paint
2. Choose a goodbye to paint

It is recommended that you lot work out of direct sunlight, preferably in temperatures betwixt 50 and xc degrees Fahrenheit.

1. - Moderate humidity is also best.
  - Avoid painting also late in the 24-hour interval to reduce the risk of dew settling and marker the paint.
2. Prepare the surface

Use the putty knife to remove flaking paint from the frame, any loose glazing from the panes, and any peeling caulk. Also

1. - Employ sandpaper to smooth transitions between old paint and raw surfaces.
  - Sandpaper also helps to prep the existing paint finish to meliorate adhesion for the new primer and paint.
  - Grit the trim, panes, and window sill using a dry out cloth, and and then clean the windows and window sill using a rag and soap solution.
  - Apply a toothbrush dipped in the solution to scrub hinges and the edges of the panes in the crevices.
  - Caulk exposed crevices and repair window glazing.
2. Use proper painting technique

It is important to programme your approach when painting your window frames.

1. - Cascade the paint in a bucket and stir information technology thoroughly earlier dipping the brush.
  - Avoid dipping the brush in the paint can directly every bit yous run a risk contaminating the pigment, especially if some is left over afterward completing the paint chore.
  - Avoid drips by tapping off excess paint against the bucket'southward interior wall, but keep reloading to maintain a wet border.
  - Starting time by painting the top edge – both the inside face up of the frame and window – every bit you motility downward to the hinged side of the window jamb. Permit information technology to dry before moving on to the other side and the lower function within the frame.
  - Go on to the edges of the window. Use a clean rag to wipe whatsoever excess paint from the interior of the window.
  - After painting the window underside, close it and proceed to the window sash. Start at the meridian and piece of work around the window sash, painting the inside edge of the frame and hinges as well.
  - Adjacent paint the elevation rail of the sash. Start with the puttied edge and paint onto the glass by 1mm.
  - Pigment the lower rail of the sash earlier proceeding to the leading edge and hinged side of the window.
  - Finish by painting the within face of the window. This order is necessary to provide a handhold back up for the painter.
2. Apply at least two coats of paint

When the frame surface is ready for painting, utilize the undercoat (or commencement glaze of primer) to the unabridged frame and sill. Let it to dry thoroughly before applying the next coat of paint. This will ensure optimal quality in colour and cease.

- Let iii–4 hours to dry before applying the second coat.
- When applying the concluding coat of paint, make certain that the brush strokes become in only 1 direction to get a cleaner finish.

Additional tips

Employ a primer earlier painting if the pigment has been completely stripped downwards, or when switching to a darker colour.
If the first tin of paint runs out earlier completing the job, ensure that the batch numbers on the 2nd tin match those on the kickoff 1.
Paint in the same direction to create natural overlap.
The hinges are typically painted in the aforementioned colour every bit the window frame.
If you lot want to use a contrast colour for the frame and sill, await until the fresh pigment on the frame and inside edges has stale and the window tin can exist closed completely.
The window must be left slightly ajar for 24 hours before it can exist fully closed.

When you are done painting your window frames, remove excess paint on the surface of the drinking glass using a sharp razor blade, and then make clean the windows with a dampened rag to remove dirt and fingerprints.

Source: https://www.clerawindows.com/blog/tips-for-painting-exterior-window-frames/

Posted by: doanewiteld.blogspot.com